|
|
| |
|
|
| |
|
光纖產品
|
| 產品描述
|
訂購信息 |
產品資料下載 >> [1]
|
|
USB 2.0 to POF Ethernet Dongle Module |
|
|
The FEUSB-XXX is USB2.0 to 100Base-FX POF (Plastic Optical Fiber) converter. The FEUSB-XXX USB 2.0 to 10/100M Fast Ethernet controller is a high performance and highly integrated ASIC which enables low cost, small form factor, and simple plug-and-play Fast Ethernet network connection capability for desktops, notebook PC’s, Ultra-Mobile PC’s, and any embedded system using a
standard USB port. LED indicators are used to display power status of converter, link/ active status of FX port and link/ active status of POF port. This product is really plug-and-play and requires no additional settings. The FEUSB-XXX series are fully compatible for IEEE 802.3u Fast Ethernet data communication standard .
•Specification
Parameter |
Optical Port |
Electrical Port |
Standard compatibility |
1.IEEE 802.3 Fast Ethernet
2. IEEE 802.3 Full Duplex Flow Control |
1. Integrates on-chip USB 2.0 transceiver and SIE compliant to USB Spec 1.1 and 2.0 |
Data Rate |
100Mbps |
480Mbps |
Transmitting Length |
50M at POF interface |
|
Interface connector |
Optolock or SMI POF transceiver |
USB A type or B type connector (Optional) |
Equipped cable |
Optolock or SMI POF patch cord (Optional) |
USB B type to A type cable (Optional) |
LED Indication |
Power status, FX link/ active status. |
Operating Environment |
Temperature: 0~ 50 ° C
Humidity: 10%~90% |
Storage Environment |
Temperature: -40~ 70 ° C
Humidity: 10%~90%(Non-condensing) |
Dimensions(W x D x H) |
70 x 35 x 18 mm |
Total Weight |
100 g |
EMC Certification |
• FCC certification: Part 15 Subpart B
2. CE certification: EN55022/ 55024/ 6 1000-3-2 / 6 1000-3-3 |
|
|
|
| 產品描述
|
訂購信息 |
產品資料下載 >> [1]
|
|
|
|
| |
|
